need help replacing my dreamcast battery

#1. Post Posted: 04-17-2019, 12:06 PM
so i have a revision 0 DC that has a dead battery i wanna replace it can soemone tell me what parts i need as well as link me to a proper guide and or tutorial so i font damage my Dc never done this before hell never even soldered before im a total noob
#2. Post Posted: 04-17-2019, 12:53 PM
Try this guide tells you exactly what you need, which should be easy to come by on Amazon or ebay - here's the perfect combo on;
#3. Post Posted: 04-17-2019, 12:54 PM
ok here is a guide.

You do not need major soldering skills to do this one. 

use this kit to swapp. That way you only have to solder once.

I have done this to my dreamcast and it works great.
#4. Post Posted: 04-17-2019, 07:27 PM
First guide i like but not so much the second, make sure you use a LIR2032 battery.
#5. Post Posted: 04-18-2019, 01:18 PM
True, Ignore everything after step 7 in my guide and install the rechargeable battery
#6. Post Posted: 04-25-2019, 11:42 AM
After posting my above response I realised that I actually needed to replace the battery in my own ntsc-J v0 DC, so I thought I'd follow my own posted advice and see how I got on...

I ordered the ML2032 battery and holder from the ebay seller I linked in my post (took less than a week to arrive from China, with free postage), cracked out my crusty old soldering iron, desoldered the original 20yr old battery, and fitted the new one. The most time consuming part was desoldering the old one, as it was a bit fiddly to make sure all the viers were completely free of solder to allow for the new holder to mount in place.
Dismantling the DC is easy, and unlike some of the other maintenance I've done in the past you don't need to remove multiple modules - just open up the shell, disconnect the fan and ribbon from the controller board, unscrew the controller mounts, and slide the controller board out.
Definitely a beginner friendly mod.
#7. Post Posted: 04-26-2019, 09:57 AM
Make sure when putting the DC back together that when putting the top shell back on the lid is in the open position to protect the lid switch at the rear. Its the same as with the Gamecube.

Jump To:

Possibly Related Threads…
Thread Author Replies Views Last Post
  Dreamcast Power Supply 12V removal HyperionAlfa 5 2,253 06-14-2019, 09:20 AM
Last Post: Biggsy666
  dreamcast dreamshell sd adaptor help wullie13 2 880 10-29-2018, 08:09 PM
Last Post: wullie13

Users browsing this thread: 1 Guest(s)